-
2 × $1.449 -
1 × $1.860 -
1 × $6.744 -
1 × $164 -
1 × $6.518 -
1 × $863 -
-
1 × $1.650 -
1 × $974 -
1 × $1.801 -
1 × $2.900 -
1 × $421 -
1 × $653 -
1 × $1.127 -
1 × $1.449 -
1 × $997 -
2 × $2.354 -
1 × $10.055 -
1 × $4.206 -
-
-
1 × $2.900 -
1 × $1.680 -
1 × $796 -
1 × $6.208 -
1 × $867 -
1 × $163 -
1 × $331 -
1 × $959 -
1 × $2.136 -
1 × $1.449 -
1 × $381 -
1 × $1.055 -
-
1 × $1.131 -
1 × $1.449
-
1 × $1.893 -
1 × $134 -
1 × $2.262 -
1 × $1.407 -
1 × $2.681 -
1 × $479 -
2 × $1.337 -
1 × $15.626 -
1 × $326 -
1 × $959 -
1 × $2.161 -
1 × $1.608
The FLIR CM82 is an industrial grade 600A Power Clamp Meter with variable frequency drive (VFD) and Harmonics functions designed for advanced power analysis.
- VFD Mode
- Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
>
- Harmonics Mode
- Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
>
- Phase Rotation
- Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
>
- Inrush Current
- Measure hard and soft start-up inrush current spikes while equipment is ramping up.
>
- Power Factor and Active Power
- Monitor power quality improvements, such as start-up realignments on three-phase equipment.
>
- Bright Dual-LED Worklights
- Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
>
- Rugged & Shock-Resistant
- Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.
>
