-
1 × $473
-
1 × $1.094
-
1 × $6.299
-
1 × $1.449
-
1 × $2.514
-
1 × $624
-
1 × $510
-
1 × $109
-
1 × $109
-
1 × $1.753
-
1 × $377
-
1 × $1.449
-
1 × $1.449
-
1 × $3.652
-
1 × $3.100
-
1 × $123
-
1 × $9.331
-
1 × $3.091
-
1 × $553
-
1 × $9.041
-
1 × $7.580
-
1 × $959
-
1 × $1.068
-
1 × $116
-
1 × $527
-
1 × $1.508
-
1 × $1.433
-
1 × $339
-
1 × $214
-
1 × $336
-
1 × $1.177
-
1 × $623
Low Cost, Series HF In-Line Flow Monitors have a design based on a floating sharp-edged orifice disk and variable area flow measurement to yield accuracy of ±2.5% over center one-third of scale. This unique design allows accurate performance with fluid viscosities up to 500 SSU. All internal wetted parts are contained inside a sealed metal tubular casing assuring a virtually maintenance-free unit. Flowing media forces linear motion of a spring loaded, sharp edge orifice disk and ring shaped transfer magnet which both ride on a tapered center shaft. The transfer magnet drives a clearly visible magnet follower located outside the flow tube, protected under the clear polycarbonate tube. A ring on the magnet follower indicates flow rate on the direct reading scale. Rubber bumpers are provided for external impact resistance. Designed for single-direction flow, Series HF Monitors are recommended for use with system filtration of at least 74 microns or a 200 mesh screen. Some applications may also require magnetic filtration. These flowmeters do not require inlet or outlet straight plumbing and can be mounted horizontally, vertically, or inverted.
- 1/2 female NPT, 5-35 GPM (19-130 LPM) water